
Serplex Push-In Wire Splitter Terminal Block, 1 Input to 6 Outputs, 42V for LED Light Strips
₹ 450.00
Serplex Push-In Wire Splitter Terminal Block, 1 Input to 6 Outputs, 42V for LED Light Strips
Product Description

Branch One DC Supply into Six Parallel Outputs
The Serplex push-in wire splitter provides a shared connection point for LED light strips and low voltage DC wiring. Its one-input, six-output layout lets you branch an incoming power supply into multiple wire runs, with marked positive and negative terminals to help identify connection points.


Key Features
One Input for Six Parallel Branches
Distribute one incoming supply across six parallel outputs rather than connecting each wire run at a separate supply point. This terminal block supports power distribution; it does not provide independent control of individual outputs.
Push-In Connection with a Self-Locking Structure
The push-in mechanism makes the terminal connection without soldering or extra tools. Strip the wire end, insert the exposed conductor into the connection hole, then press the button to lock it in place. The self-locking structure holds the conductor at the terminal.
Marked DC Polarity and Defined Electrical Limits
Clearly marked positive and negative terminals help you match red and black wires to the two DC poles. The splitter is rated at 42V, with a maximum input current of 9A and a maximum output current of 1.5A. Check both current limits when planning your connections.
Nylon PA Housing and Copper Contacts
The nylon PA housing provides insulation and flame resistance, while copper contacts form the conductive connections inside the splitter. Supported conductor sizes are 0.2 to 0.75 square millimetres, corresponding to AWG 24 to 18. Check your wire size against this range before making connections.
Compact Dimensions with a Side Fixing Point
Measuring 59 mm long by 16 mm wide by 15.5 mm high, the connector gives you clear dimensions for planning its position. A side screw hole provides a fixing point for attachment to a surface or panel, helping you plan its placement within your DC wiring layout.

Practical Uses
- Branching a DC power supply to multiple LED light strip wire runs.
- Creating a shared distribution point for low voltage DC wiring.
- Arranging surface- or panel-mounted DC connections using the side fixing hole.


Specifications
| Brand | Serplex |
|---|---|
| Product type | Push-in wire splitter terminal block |
| Distribution layout | 1 input to 6 parallel outputs |
| Terminal configuration | 2 pin, marked positive and negative |
| Connection mechanism | Push-in, self-locking |
| Housing material | Nylon PA |
| Contact material | Copper |
| Rated voltage | 42V |
| Maximum input current | 9A |
| Maximum output current | 1.5A |
| Supported conductor sizes | 0.2 to 0.75 square millimetres; AWG 24 to 18 |
| Dimensions | 59 mm long × 16 mm wide × 15.5 mm high |
| Mounting provision | Side screw hole for surface or panel attachment |

Why Choose This Push-In Wire Splitter?
Choose this splitter when you need six parallel branches from one DC input, rather than separate output switching. Its marked polarity, push-in connections and side mounting point suit planned LED strip and low voltage DC wiring layouts within the stated electrical and conductor-size limits.


Frequently Asked Questions
Can I control each output separately?
No. The outputs share the incoming supply through a parallel distribution layout; the splitter does not provide individual output control.
What wire sizes does it accept?
It supports conductors from 0.2 to 0.75 square millimetres, corresponding to AWG 24 to 18.
Do the wire connections need soldering?
No. Insert the stripped conductor into the terminal opening and press the locking button. The push-in connection requires no soldering.
Can it be fixed to a panel?
Yes. A screw hole on the side provides an attachment point for a panel or surface. Allow space for its 59 × 16 × 15.5 mm dimensions.
Information
Packer:Verilux
Shipping & Returns
Shipping Area
We ship within India, subject to courier serviceability.
Order Processing & Delivery
Orders are processed within 1–3 business days. Delivery typically takes an additional 2–7 business days after dispatch. The estimated total time from order placement to delivery is 3–10 business days. Weekends and public holidays are excluded. Delivery estimates may be extended during peak periods or due to courier delays.
Shipping Fees
Standard shipping is free for prepaid orders within India, except for the remote areas listed below.
Cash on Delivery (COD) orders incur a flat ₹100 COD fee per order.
An additional ₹70 remote-area shipping fee applies to both prepaid and COD orders delivered to the listed remote areas. For COD orders to these areas, the total additional charge is ₹170.
Applicable fees are displayed at checkout and included in your order total.
Remote Areas
Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Tripura, Sikkim, Jammu & Kashmir, and Ladakh.
View our Shipping & Delivery policy for fees, remote areas and delivery estimates.













