Verilux Fully Automatic Car Battery Charger 5A 12V(Red)

• Wide Range Use: Suitable for all kinds of vehicles, charges all type of AGM, GEL, SLA, Flooded(WET), calcium type deep cycle automotive or marine 4Ah-100Ah 12V battery: Cars, motorcycles, lawnmowers and more. Perfect for keeping your vehicles fully-charged and maintained during year-round battery maintenance or long-term storage.
• Fast Charging Car and Bike Battery Booster Input Voltage: 100-240V AC, 50-60Hz; Rated output: 12V DC,5-6A Max; Minimum start voltage: 8.0V; Battery range: 4-100Ah.
• Multiple protection: Built in circuit protection guards against reverse polarity, sparks, overcharging, over-current, open-circuits, short-circuits and overheating. Avoid any dangerous situation. ideal for carefree long-term maintenance battery for car charging.
• Intelligent LED Digital Display:displays charging status and battery status, charge voltage, charge current, etc.Automatically stops charging when fully charged.It provides constant voltage charge for optimal maintenance of the battery. Can enables optimal battery charging without fear of overcharging.
• High Technology & Efficiency: Solve battery power, power acceleration and internal resistance problems. Using pulse repair technology to repair pulsed high frequency and low frequency, low bottle piezoelectric, has been idle for a long time, the battery does not charge the battery, has a good effect repair and activation, thus changing the battery is a good measure.

Specifications

1. Suitable for 12V AGM/GEL/Wet/Calcium type deep cycle/VRLA maintenance free lead acid batteries
2. Battery Capacity: 4Ah - 100Ah
3. Charge Current: 5 Amp
4. Input Voltage: 100-240VAC 50/60Hz 75W
5. Input Current: 0.5A(RMS)@230VAC
6. Charge Voltage: Summer Mode: 14.4V; Normal Mode: 14.7V; Winter Mode: 15.5V
7. Operate Temperature: -20℃ to +45℃(-4℉ to 113℉)
8. Size: 150*85*60mm(0.6*0.34*0.24in) Weight: Approx. 380g(0.84lb)

Remark: for 4Ah-15Ah battery, we suggest use “Repair” mode, because the battery size is too small, use pulse charge is very good for small size battery.

How to Use

• 1. Please reconfirm your battery parameters are compatible to the charger (at the back of the charger).
• 2. Carefully connect the red clamp to the positive pole (+), and the black clamp to the negative pole (﹣).
• 3. Battery voltage, charge current and inside temperature will be showed on the LCD display. (Temperature is for reference only, allowed tolerance).
• 4. Wrong battery connection warning: "EI-I-" will displayed on screen , the indicating lamp will flash.
• 5. Plug AC power source with the charger, charger will start to work. (Charge-lamp will start to flash in red).
• 6. Once the battery is fully charged, there will be letters “FUL” on screen, meanwhile, the charge indicating lamp will keep on. Highly recommend keep the charged status for 1-2 hours.
• 7. Charging completed, remove the charger.